TIME-SERT® UNC threaded bushing
Insert nut UNC Time-Sert
NUT-INRT-UNC-(7/16-14)XL0,87IN
TIME-SERT
Register now and access more than 125,000 products
Tear-out strength
The tear-out strength may vary subject to application (edge areas etc.) and material. As a result, no general information can be provided on this topic. Tests in the Würth laboratory have shown that the Time-Sert thread repairs are equivalent to the original threads in most cases.
Datasheets(X)
Surface | Zinc phosphated |
Material | Steel |
Nominal diameter x number of thread starts per inch (My) | 7/16 x 14 |
Length in inches (L) | 0.87 in |
Last viewed
Carbide plastic drill bit With clamping surface and adjustment screw
O-ring, metric
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain
Rosette Brass, MS 63 F 30, black oxide
Lock washer DIN 128, steel, mechanically applied zinc coating (MZN)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
K insulation pipe clamp With permanently integrated damping insert
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Furniture handle screw
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip