TIME-SERT® threaded bushing
Insert nut Time-Sert
NUT-INRT-M11X1,25X22
TIME-SERT
Register now and access more than 125,000 products
Safe working, including on weak walls
Very thin-walled owing to synchronously running threads.
Can be used in thin-walled materials
Reliable repairs where only a few thread turns are available.
Impermeable to media
Pressure application with the workpiece makes the thread pressure-sealed for water, oil, other liquids and compressed gases.
Self-locking
Automatic shaping of not yet fully formed threads when screwing in. The nut is guaranteed not to twist out, even without bonding.
Accurate positioning in the workpiece
The nuts have a collar, no additional securing in the workpiece is necessary
Tear-out strength
Tear-out strength may vary subject to application (edge areas etc.) and material. As a result, no general information can be provided on this topic. Tests in the Würth laboratory have shown that the Time-Sert thread repairs are equivalent to the original threads in most cases.
Steel nuts
Material: 9SMn/Pb28K DIN1651/668
Coating: galvanised, passivated.
Datasheets(X)
Thread type x nominal diameter x pitch (My) | M11 x 1.25 |
Length (L) | 22 mm |
Design | Metric fine thread |
Surface | Zinc plated |
Material | Steel |
Last viewed
Raised countersunk head screw with H recessed head DIN 966, A2 stainless steel, plain
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Plaster strips
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
ASSY®plus 4 TH glass strip screw Hardened zinc-plated steel partial thread 60° Top Head, white
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Zinc safety spoke weight, Mercedes Benz
KL locking device