Universal three-arm external and internal extractor
Universal extractor three-arm
EXTR-UNI-3ARM-SPNW160MM
Register now and access more than 125,000 products
- Proven model for secure and rapid removal of races, gears, ball bearings etc.
- Even load distribution over 3 pulling hooks for a secure hold and centred removal
- Cross-beam in cast iron due to geometry
- Drop-forged hooks
- Gas nitrocarburised spindle
- Precision-milled feet grip parts being removed securely and gently
Datasheets(X)
 | |
External clamping width (A) | 160 mm |
Clamping depth (B) | 150 mm |
Min./max. internal clamping width (C) | 130-220 mm |
Spindle length | 210 mm |
Hook width (D) | 30 mm |
Hook-tip length (E) | 18 mm |
Hook-tip thickness (F) | 3.5 mm |
Max. extraction weight (t max) | 5 t |
Number of arms | 3 PCS |
Thread dimension | G 1/2 inch |
Last viewed
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
Hammer head bolt with square neck DIN 186, A2 stainless steel, plain
Castellated nut, low profile with fine thread DIN 979, steel 5, zinc-plated, blue passivated (A2K)
Wood screw, DIN 95 brass Raised countersunk head, slotted
Ring-shaped crimp cable lug DIN 46234 and similar
Sound-absorbing lining
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
HSCo8 keyway end mill, short, twin blade, centre-cutting DIN 327D
Sleeve connector For Alu-Steck-WES aluminium pipe